Quick Overview
Full Pallet Hot Pour Crack Sealant (1,800 lbs)
FREE Fully Assembled asphalt crack filling machine! Limited While supplies last!
Direct Fire Crack Sealant. Fill driveway cracks and parking lot cracks with this professional grade high performance crack filler and sealer. It is compatible with both oil jacketed asphalt kettles and direct fire asphalt crack filling machines.
Use our crack fill calculator to calculate how many lbs of crack fill you need.
- Repairs 12,000+ LFT of asphalt cracks or concrete joints.
- Formulated for extreme weather.
- Airport grade rubberized crack sealant.
- Fast melting, stronger bonding, and supreme stretchability.
- Non clogging patented polyskin packaging.
- Recommended for HOTBOX melters.
- Fast Free shipping.
- 6690 Spec. DOT and FAA approved
- Highway and airport grade
- Prolongs the pavement service life
- Seals cracks and joints from water penetration
- Traffic ready in 10-30 minutes
- High rubber content, supreme stretchability
- High adhesives, long lasting formulation
Product Details
This professional grade crack filler is compatible with oil jacketed asphalt kettles and direct fire crack filler equipment such as the Hotbox 10 and Hotbox 30. Our economical and best selling 2-in-1 crack fill machine is perfect to melt down and apply this crack filler. As long as the crack filler is not heated for an extended amount of time above its flash point (when bubbles start to form) the asphalt repair result should be a permanent one that will last for up to 10 years.
Get a FREE asphalt crack filling machine! Fill driveway cracks and parking lot cracks with this professional grade high performance crack filler and sealer. Airport and highway grade crack filler and sealer gives you professional results. Use our crack fill calculator to see how much crack fillers you need.
- Excellent bonding characteristics
- Weather resistant
- Passes multiple freeze and thaw cycles
- Each box contains 2 blocks, half pallet will contain 15 boxes
- 60 blocks @ 30LBS each: 1,800 LBS total (ships two blocks per box)
- Repairs 6,000+ LFT of asphalt cracks or concrete joints
- Premium rubberized hot crack fill for direct fire melters
- Fast melting, stronger bonding, and supreme stretchability once applied
- Permanently flexibly seal cracks instead of using temporary rigid epoxy-based fills
- Performs well in extreme temperature ranges
- Recommended for HOTBOX melters
- 6690 Spec. DOT and FAA approved
- Highway and airport grade
- Prolongs the pavement service life
- Seals cracks and joints from water penetration
- Traffic ready in 10-30 minutes
- High rubber content, supreme stretchability
- High adhesives, long lasting formulation
- Oil jacketed equipment compatible
- Formulated for extreme hot and cold weathers
- 10+ year shelf-life
Note: machine color and markings may vary.
FAQs:
How many blocks can a 10 gallon melter take?
Each block of hot asphalt crack filler melts down to about 2.5 gallons. So 3 to 4 blocks can go in the 10 gallon crack filling machine melted, or 6-12 blocks in the 30 gallon crack melter kettle.
What is hot crack filler?
Hot crack filler is the preferred method of crack repair in comparison to cold crack fillers. Hot asphalt crack filling, sometimes called hot tar crack filling or sealing, is a generic term that describes a hot melt method to fill asphalt pavement cracks. Although concrete cracks can be filled with this same type of crack filler, it is not desired due to the asphalt rubber's darker color. Hot crack filler is a rubber containing sealant that should be heated to around 400º with asphalt melting equipment and applied with crack filling machines. Most contractors prefer hot crack filler over cold pour because the hot melt asphalt sealant allows traffic in less than 30 minutes of laying it down, compared to hours with cold. If you are looking for equipment to melt down and apply this crack filler, we sell that too!
How much crack filler do I need?
Generally speaking, a standard driveway uses about 6 blocks. A long driveway or a small parking lot uses about 12 blocks. If you are still unsure how much you need for your crack fill project, use our crack fill calculator here to calculate how many LBS of crack filler you need.
How soon can you drive on newly filled cracks?
Hot crack filler is traffic ready as soon as it cools down enough to become not tacky anymore, which takes 10-40 minutes depending on the weather. In cold weathers the melted crack filler cools faster. To test, you can use a stick to poke the filler sealant, if it does not tack to the stick then you are ready for foot traffic. Give it an additional few minutes for vehicle traffic.
Should I pour sand over filled cracks?
How long does it take asphalt crack filler to dry?
Can I fill driveway cracks in the winter?
It depends on where you are, it is recommended to fill cracks when pavement is at least 40°F. That being said it is still possible to fill cracks in cold weather by heating up the pavement by using a heat lance or a weed torch. Torching the cracks prior to crack filling also makes sure the crack walls are completely void of moisture.
What temperature should I apply hot pour crack filler at?
380 - 400°F (193 - 204°C). Try to keep the crackfill machine's temperature under 500
°F as prolonged exposure to high heat will oxidize and age the asphalt in the crack filler.
Does hot crack filler expire?
How long can I keep unused crack filler?
Generally speaking, unlike cold crack filler which is emulsified with water, hot crack filler does not "expire". Most hot asphalt crack filler has a shelf life of 10 years or more. If stored outside, make sure to keep unboxed sealants out of direct sunlight as UV damage is one major factor that ages the sealant. In addition prolonged high temperature can accelerate asphalt aging, so when the weather gets hot it may be a good idea to bring the crack filler indoors or to a cool shady place.
Can you seal coat over the filled cracks?
Yes. Both hot rubber asphalt crack filler and cold pour crack filler cracks can be sealed over with a driveway sealer. All are asphalt based products.
After crack filling, how soon can you sealcoat?
For liquid cold pour crack filler, it is important to let the sealant dry completely before spraying or squeegeeing on sealcoat, as trapped water will affect bonding later. It takes cold crack filler 24 to 48 hours to completely dry.
For hot pour crack filler, as there is no water in the formula, it is ready for sealcoat application much sooner, usually in 20-40 minutes. It is important to let the hot crack filler cool down to ambient temperature prior to applying driveway sealer.
When melting the hot tar crack filler, does the plastic wrapper go inside the melter kettle?
Yes. The plastic wrapper is designed to melt together with the hot crack filler inside the kettle.
Does the hot pour crack filler work with latex paint?
Use with caution. The rubber asphalt will bond to the paint. However the paint might peel off the pavement over time.
How many linear feet does the crack filler cover?
Each pound of hot crack filler covers about 7-8 linear feet of medium width cracks. Each crack filler block covers about 150 linear feet of medium cracks, or 200 linear feet of small cracks. It is recommended that for large and deep pavement cracks, fill the crack with silica sand till about half inch to the pavement surface prior to pouring crack filler product. This gives better structural support as well as using the crack filler more efficiently.
If you are unsure, you can
use our crack fill and sealcoat calculators here to calculate how many LBS of crack filler product you need.