Hot Crack Sealing Hose Heated- 20’ x 1” Hot Rubber dispensing hose for your crack sealing operation. Hot Tar Hose is designed for transfer of hot oil and tar in applications to 455°F.

Crack sealing applications sometimes rquire a hose to transfer hot tar material from the kettle to the desired location. This hose is ideal for gravity feed applications where you need to transfer crack fill to hard to reach or underground locations.This 20’ tar hose will attach to your existing crack kettle. Our hoses for hot rubber applicators are the best in the industry and will work on your Hotbox 10 and Hotbox 30 machine.

20’ Hot Tar Hose Heated and made for hot material transfer. Note hose does not come with electrical control box. Perfect accessory hose and length for Hot Rubber Applicators. Comes with adapter to connect to Hotbox 10 and Hotbox 30 units. Compatible with Cimline and Crafco machines. Connectors are 3/4'' Female JIC.

• Lightweight, 50% lighter than Cimline hose
• Not hot to the touch
• Superior Flexibility
• Rebuildable 
• Less expensive than Cimline hoses
• Superior safety shroud compared to Cimline hose
• Designed to reduce clogs 
• Allows for more material per yard than Cimline hose
• Fits all Cimline Melters
• Higher qulaity at a lower cost!
•  

Hose Specifications

• Electrically Heated Material Hose
• Hose Weight At Under 25 Lbs
• Insulated
• Braided Hose Core
• Flexible 8" Bend Radius Empty
• Flexible 12" Bend Radius With Material Inside
• Lightweight, 15 Lbs Lighter Than Crafco Hose
• Uses 6 Independent Heating Elements
• Heating Elements Each Independently Wired. If A Heating Element Breaks The Remaining Elements Will Continue To Function, Keeping You Operational
• Safety Shroud With Crimped Ends  Removable Hose Shroud With Quick Connect Pin
• Continuous Service Temperature At 455 F (233c)
• Intermittent Temperature To 505 F (263c)
• Working Pressure 1050 Psi
• Test Pressure 1525 Psi
• Burst Pressure 4100 Psi
• Minimum Bend Radius 5.5 Inches (14cm)
• Integrated Male Swivels On Each End
• Quick Remove Pin Release Hose Cover

ELECTROFIRE - Digital Torch for HOTBOX 10E

Only high-BTU torch with digital temperature control on the market.

• Push button start for safer operation
• Auto ignite on flameout
• One Year Warranty on control unit
• 2-4 day Free Shipping in Contiguous U.S.

Product Details:

• ELECTROFIRE is an upgrade from for a traditional manual high-BTU propane torch.
• Safer operation than manual fire ignition and contol.
• Digital thermostatic control lets you set the desired temperature with confidence.
• If flame blows-out ELECTROFIRE with automatially re-ignite with no operator intervention needed.
• Unit with ignite/turn off as needed to maintain optimal temperature.
• One button push start. Programmable temperature control 100 F - 550 F
• Upgrade your asphalt kettle to a high-perforamnce machine. With the ELECTROFIRE you can use your kettle for bituminous marker adhesive applications.
• Lay down material exactly at DOT specifications.
• Optimal temperature means you never overheat/crystalize adhesive or sealant material.
• Can be used on any compatiable HOTBOX 10 machines

ELECTROFIRE

Accessories:

• 60,000 BTU combustion torch head
• Hose (3 FT) from propane to control unit
• Propane regulator and hook-up (for atandard 20 LB propane tank)
• Hose (2 FT) from control unit to torch head
• Digital temperature probe
• Mounting brackets
• One year warranty by manufacturer.

Who qualifies for Free Shipping

Shipping is FREE for the contiguous United States. We ship next day. Shipping takes 2-4 days across the continental United States. Melter Applicator will be delivered to your local Freight terminal or to commercial addresses

Hawaii, Alaska, and international shipping can be added on checkout.

What is our return policy?

Any unopened and unused machines qualify for a full refund within 14 days of receipt. Buyer must pay for return shipping. Any missing or damaged parts will be replaced for free within 14 days of receipt.

Hot Crack Sealing Hose - 20’ x 1” Hot Rubber dispensing hose (non heated) for your crack sealing operation. Hot Tar Hose is designed for transfer of hot oil and tar in applications to 455°F.

Crack sealing applications sometimes rquire a hose to transfer hot tar material from the kettle to the desired location. This hose is ideal for gravity feed applications where you need to transfer crack fill to hard to reach or underground locations.This 20’ tar hose will attach to your existing crack kettle. Our hoses for hot rubber applicators are the best in the industry and will work on your Hotbox 10 and Hotbox 30 machine.

20’ Hot Tar Hose (non heated) but made for hot material transfer. Perfect accessory hose and length for Hot Rubber Applicators. Comes with adapter to connect to Hotbox 10 and Hotbox 30 units. Compatible with Cimline and Crafco machines.

• 20’ Hose Length 
• For all Cimline Melters
• Fits all Crafco Melters
• Superior to Original Equipment!

Torch/Regulator/Hose assembly:

• Replacement accessory set for Hotbox10/Hotbox30 melters
• Includes torch, brass ball valve w/ orifice, 8ft hose, lp-gas regulator (push-lock) and brass connectors.
• Fits all standard propane tank
• Fits most 10 gallon and 30 gallon asphalt melter torch holes
• Original parts for maximum lifetime

HOTBOX 30 DRUM FAUCET:

• Replacement molasses faucet for Hotbox30
• Cast iron 1 1/2 inch diameter
• Fits all standard 30/60 gallon melters
• Original part for maximum lifetime
• MADE In USA

Cast Iron Gate Valves - 8700SC2 Fast flow control without splashing Padlockable handle Manual and self-closing models Excellent for dispensing non-flammable viscous liquids. Super rugged cast iron gate valves have a large, nearly straight bore with an oval discharge opening angled at 45-60º for fast flow of thick liquids without splashing. Self Closing Long Handle NPT Inlet Size: 1 1/2 in. Weight: 6 lbs.

Temperature Gauge:

• Solid aluminum 3 inch dial from 50 to 650 degrees with 16 inch length
• Replacement temperature gauge for Hotbox10/Hotbox30
• Includes temperature gauge
• Fits all standard 10/30 gallon melters
• Original part for maximum lifetime

Torch assembly:

• Replacement torch assembly for Hotbox10/Hotbox30 melters
• Includes torch, brass ball valve
• Fits most 10 gallon and 30 gallon asphalt melter torch holes
• Original parts for maximum lifetime

REPLACEMENT BACK WHEEL w/ bearing:

• Replacement back wheel for Hotbox10
• Includes wheel w/ metal bearing
• Fits all standard 10 gallon mobile melters 
• Original part for maximum lifetime

Front Torch Set - HOTBOX10/10E

• Front torch set for Hotbox10/Hotbox10E melter applicators.
• 50,000 BTU capacity.
• Independent flow control from main torch.
• Ideal addon for burning off weeds and drying up cracks.
• An absolute dry condition is the key to prevent crack re-emergence.
• Includes front torch, brass needle valve w/ orifice, 8ft hose, splitor (to be connected to lp-gas regulator on tank side).
• Original part. Maximum lifetime.

FRONT WHEEL ASSEMBLY:

• Replacement front wheel assembly for Hotbox10
• Includes caster and front wheel w/bearing
• Fits all standard 10 gallon mobile melters
• Original part for maximum lifetime

FRONT WHEEL:

• Replacement front wheel with bearing for Hotbox10
• Solid steel 4 inch diameter from wheel
• Fits all standard 10 gallon mobile melters
• Original part for maximum lifetime

LP-GAS REGULATOR KIT:

• Replacement pressure regulator for Hotbox series melters
• Includes lp-gas regulator, brass connectors
• Fits all standard propane tank openning
• Original part for maximum lifetime

Sealcoating Squeegee

Free Shipping for Contiguous U.S.

Features:

• Large Rubber Blade to smooth out driveway and parking lot sealcoat
• Industrial Aluminum & Steel construction for extra strength and durability
• Black neoprene blade has a durameter of 72 and a temperature rating of 338° F / 170° C
• Straight Blade Squeegee w/60" Wood handle
• Used for spreading sealers over existing asphalt surface
• Blade Size: 36" (914mm)
• Made in USA

Asphalt Sealcoating Squeegee, End Type Straight, Length (In.) 60, Width (In.) 36, Material Black Neoprene Blade, Aluminum and Steel Bracket, Straight, Wood Handle, Handle Length (In.) 60, Handle Dia. (In.) 1-1/8, Characteristics Black Neoprene Has A Durameter Reading Of 72 And Temp. Rating Of 338 Degrees F/170 Degrees C, Replaceable Handle, Reversible Blade, Application For Spreading Sealers Over Existing Asphalt Surfaces, For Use With Asphalt Sealers, Sealer / Filler, and Resurfacers.

Who qualifies for Free Shipping

Shipping is FREE for the contiguous United States. We ship next day. Shipping takes 2-4 days across the continental United States. Melter Applicator will be delivered to your local Freight terminal or to commercial addresses

Hawaii, Alaska, and international shipping can be added on checkout.

What is our return policy?

Any unopened and unused machines qualify for a full refund within 14 days of receipt. Buyer must pay for return shipping. Any missing or damaged parts will be replaced for free within 14 days of receipt.

2-WAY TORCH VALVE:

• Replacement 2-way valve for burner torch
• Includes valve w/ orifice
• Fits most 10 gallon and 30 gallon asphalt melter torch
• Original part for maximum lifetime

LEAKGUARD:

• Designed to catch melted crackfiller dripping on the job site
• Upgrade option for Hotbox10
• Includes upgrade kit for LEAKGUARD
• Fits all standard 10 gallon mobile melters
• Original part for maximum lifetime

It is recommended to always have a replacement pad handy in case your HOTWHEELS Silicone Squeegee Pad gets damaged or wears out.

Hotwheels features:

• Hotpot on wheels, upgrade to easier crack filling.
• Valve control level next to push handle.
• Replacable squeegee pad for a clean and professional line edge. 
• Holds 2.5-3 gallons of asphalt sealant.
• Works with Both hot and cold sealant.
• Anti-leak and Anti-drip design.
• HOTWHEELS works BETTER than a Banding machine!